POWER LIFT HF 3S 5000 DG HSV 4900 mm

The hydraulic 2-post lift POWER LIFT HF 3S 5000 DG HSV 4900 mm with a load capacity of 5000 kg and double-jointed arms is the only lift in the world with a triple safety system. It is also the ideal lift for the demanding automotive workshop serving all vehicle types, from short small cars to heavy SUVs to long wheelbase vans and vans. With the very fast lifting and lowering times, minimal maintenance (no synchronous cables, no rollers) and the automatic safety lock, it is the ideal lift for daily continuous use in a garage where flexibility and reactivity are required. With the symmetrical telescopic double-jointed arms you can lift a wide range of vehicle sizes and weight classes from SMART/BMW Mini to MERCEDES-BENZ Sprinter and VW Crafter with a long wheelbase.

The POWER LIFT HF 3S 5000 DG HSV 4900 mm is equipped as standard with the patented Nussbaum technologies NT and HyperFlow® and has been developed and manufactured by Nussbaum since its market launch in 2014 in Kehl-Bodersweier in Baden-Württemberg.

• Lifting time: 31 seconds
• Lowering time: 15 seconds
• Capacity: 5000 kg
• Double-jointed arms reach the mounting points of various vehicle sizes
• Adjustable in width and height (with optional riser pipe extension)
• Compressed air connection and 220 V socket integrated in column
• High quality: Every power unit and every hydraulic cylinder is tested before shipment.
• Developed and manufactured in Germany

The HF 3S series is the result of over 40 years of experience in the manufacturing and development of high-quality automotive lifts Made in Germany. With specially developed in-house technologies, we are the world's only lift manufacturer able to offer you a precise, variable lowering speed and perfect synchronisation without manual maintenance. The ergonomic continuously variable operating lever Nussbaum-Commander enables sensitive lowering and allows the user to change and correct positions in no time at all, all with maximum safety. The main switch attached to the control column can also be secured with a padlock. The POWER LIFT HF 3S 5000 DG HSV 4900 mm is not only safe, but also exceptionally flexible and can be adapted to a wide range of workshop sizes and configurations. Its base frame-free design, which can be adjusted in terms of installation width and height, enables a wide variety of installation combinations and variants: With a minimum height of 4035-4935 mm thanks to the optional riser pipe extensions, the POWER LIFT HF 3S 5000 DG HSV 4900 mm can be used both in workshops with low ceiling heights and to lift high vehicles such as vans and trucks to the ideal working height for you.

The pulling hydraulic cylinders protect the hydraulic circuit even during intensive use and require very little power. The low power consumption, the constant automatic compensation of the hydraulic circuits by the HyperFlow® system and the low maintenance requirements, also thanks to the reduced number of moving parts, reduce running costs. The submerged oil motor is mounted on the control column and is easily accessible for maintenance. A compressed air connection and a 220 V socket are integrated into the control column. The arms and columns are welded in Nussbaum's own state-of-the-art welding machines, shot-peened and then powder-coated grau. Your lift is thus protected against dirt and weather in the long term.

The design and workmanship of the POWER LIFT HF 3S 5000 DG HSV 4900 mm give your lift an elegant overall appearance, which also allows your workshop to appear in the best light in direct customer contact.

How does the Nussbaum safety lock differ from conventional safety systems?

Die Nussbaum-Sicherheitsklinke sichert das Fahrzeug während des Hubvorgangs automatisch in Abständen von 100 mm bis zur maximalen Hubhöhe von mm. Durch den an der Bediensäule angebrachten Sicherheitsschalter kann die Hebebühne zusätzlich manuell in die Klinke abgesetzt werden. Im Gegensatz zu herkömmlichen 2 Säulen Hebebühnen mit Sicherheitsklinken erzeugt die Sicherheitsklinke während des Hebens und Senkens kein sonst für diese Art der Hebebühnen typisches Klack-Geräusch. Das Fahrzeug kann direkt nach Freigabe der Klinke abgesenkt werden, ohne erst nach oben aus der Klinke gehoben werden zu müssen.

Lieferumfang

Hebebühne mit Unterölaggregat an der Hubsäule, Steuerung mittels Commander Hebel, Hubsäulenverlängerung variabel einstellbar, Universal bzw. Doppelgelenktragarme, im Tragarm gesteckte Teleskopdrehteller, CE-STOP bei DG Ausführung

Bauseitige Leistungen

Fundamentstärke von min. 250mm mit Qualität min. C20/25, 14 Dübel BM16-25/100/40 (abhängig vom Fundament, siehe Prüfbuch), Elektroanschluss 3 PH, N + PE, 400 V, 50 Hz, Absicherung 16 Amp. träge, Hydrauliköl HLP 32 ca. 10l[newline marker]Entladung